Dell PowerEdge 2970 Hardware Owner's Manual - Page 87
Installing the Diskette Drive Into the Drive Carrier, Tape Drive
View all Dell PowerEdge 2970 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Figure 3-22. Installing and Removing the Diskette Drive Into and From the Drive Carrier 2 3 4 1 1 diskette drive tray 2 shim 4 diskette drive release tabs (2) 3 diskette drive Installing the Diskette Drive Into the Drive Carrier 1 Align the back of the diskette drive with the back of the carrier. 2 Add the shim to the drive. 3 Gently push the drive into the carrier until it pops in securely. See Figure 3-22. Tape Drive This section describes how to configure and install an internal SCSI or SATA tape drive. NOTE: Installing a SCSI tape drive requires an optional SCSI controller card. Removing and Installing an Internal Tape Drive NOTICE: See "Protecting Against Electrostatic Discharge" in the safety instructions in your Product Information Guide. 1 Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet. Installing System Components 87