Epson Stylus Pro 9000 User Manual - Page 23
Removing Paper from the Spindle, up the paper before you remove the spindle.
View all Epson Stylus Pro 9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
1-6 | Handling Paper and Other Media 5. Slide the movable paper stop back onto the spindle and insert it firmly into the end of the roll. Caution To avoid damage, do not tap the end of the spindle on the floor. Note Removing Paper from the Spindle If you need to remove the paper roll from the spindle, follow these steps: 1. Open the roll paper cover and lift out the roll and spindle. If the paper is loaded for printing, first raise the paper set lever and roll up the paper before you remove the spindle. 2. Lay the roll down on a flat surface. 3. Loosen the movable paper stop by tapping it with your hand. 4. Slide the paper stop off the end of the spindle. 5. Remove the roll from the spindle. Store unused roll paper in its original package- including the bag, end caps, and box-to protect the paper. 1-6