Epson Stylus Pro 9000 User Manual - Page 73
Setting Up the Printer After Transporting It, Assembly and, Setup Instructions
View all Epson Stylus Pro 9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
3-18 | Maintaining and Transporting the Printer 7. While holding the printer unit, remove the screws from the left and right sides. Keep the screws in a safe place. Warning The printer unit weighs approximately 212 lb (96 kg). Always have four people lift it, using the hand grip areas as shown. 8. Have four people lift the printer unit off of the leg assembly, using the hand grips. Lift the back of the printer first, tilt it slightly to the front, then slide it back to remove it. 9. Keep the printer level while you move it. Setting Up the Printer After Transporting It Setting up the printer after transporting it is almost identical to setting it up for the first time. Whenever you set up the printer, see the Assembly and Setup Instructions, and note the following points: • Don't forget to open the side ink valve locks. The printer can't print while they are closed. • Don't forget to remove any protective material (such as tape from the ink cartridge clamps). 3-18