Epson Stylus Pro 9000 User Manual - Page 75
Replacing the Waste Ink System
View all Epson Stylus Pro 9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
3-20 | Maintaining and Transporting the Printer Replacing the Waste Ink System Approximately every two years (or after 12,000 B1-size prints), you must have your authorized EPSON servicer replace the waste ink system. This is necessary to prevent damage to the print head and maintain print quality. Parts and labor for this service are not covered under the terms of the limited warranty. You can monitor the status of the waste ink system through the control panel (see page 2-4) or through the Ink Pad number displayed on the nozzle check print (see page 2-3). The printer will display the following message on the control panel when the waste ink system is almost full: MAINTENANCE REQ. 0100 You should call to schedule service at this point. When the waste ink system is at full capacity, the printer will stop and display the following message: SERVICE REQ. 00000100 3-20