HP 9000 rp4410-4 User Service Guide, Fifth Edition - HP 9000 rp4410/4440 - Page 105

Table 3-13 Setup Checklist Step Standard Setup 1 Preparation 2 Configure the iLO MP LAN 3 Log on to the iLO MP 4 Change default user name and password 5 Set up user accounts 6 Set up security access Advanced Setup 1 Activate Advanced Pack Features Action X 1. Determine a LAN configuration method and assign an IP address if necessary. 2. Determine an access method to select and connect the cables. Choose one of the following methods to configure the LAN for iLO MP access: • DHCP with DNS • ARP Ping • RS-232 serial port Log in to the iLO MP from a supported web browser or command line using the default user name and password. Change the default user name and password on the administrator account to your predefined selections. Set up the user accounts if you are using the local accounts feature. Set up the security access settings. Activate advanced features by entering a license key. Setup Flowchart To assist in the Integrity iLO MP setup process, use this flowchart as a guide. Console Setup 105