HP 9000 rp4410-4 User Service Guide, Fifth Edition - HP 9000 rp4410/4440 - Page 64
Replacing the Front Bezel, Front and Top Covers, Removing the Front Cover
View all HP 9000 rp4410-4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Figure 3-11 Removing and Replacing the Front Bezel The front control panel access door is on the bezel. Opening the control panel door provides access to the following components: • Power button • System LEDs Replacing the Front Bezel To replace the front bezel, hold the bezel in the mounting position and push the bezel straight into the chassis until it snaps into place. Front and Top Covers CAUTION: Do not operate the server without the front and top covers in place. Operation of the server without the front and top covers in place makes the server susceptible to electromagnetic interference (EMI) and overheating problems that result in system failure. Observe all electrostatic discharge (ESD) safety precautions before attempting this procedure. Failure to follow ESD safety precautions can result in damage to the server. NOTE: When the front or top cover is removed, the chassis fan units increase to high speed to assist cooling. When the top cover is replaced at the end of the operation, the chassis fans return to normal speed. Removing the Front Cover CAUTION: Power the server off before removing the front cover. All the components that are accessible behind the front cover are cold-swappable and require power to be off. To remove the front cover, follow these steps: 64 Installing the System