HP 9000 rp4410-4 User Service Guide, Fifth Edition - HP 9000 rp4410/4440 - Page 158
DIMM Memory Extender Board Slot IDs
View all HP 9000 rp4410-4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
1 One DIMM filler board covers two adjacent DIMM connectors. Figure 6-8 16-DIMM Memory Extender Board Slot IDs An optional 32-DIMM memory extender board is available to replace the 16-DIMM memory extender board. This extender board must contain a minimum of one GB of memory [four 256 MB DIMMs loaded in quad 0 (connectors 0A, 0B, 0C, and 0D)]. Table 6-2 and Figure 6-9 show the filler requirements and slot IDs for the 32-DIMM memory extender board. Table 6-2 DIMM Filler Requirements for 32-DIMM Memory Extender Board DIMMs Loaded Fillers required1 4 DIMMs in quad 0 12 fillers total: Two fillers in quads 1, 3, 4, 5, 6, and 7 (quad 2 remains unfilled) 8 DIMMs in quads 0 and 1 Eight fillers total: Two fillers in quads 4, 5, 6, and 7 (quads 2 and 3 remain unfilled) 12 DIMMs in quads 0, 1, and 2 Eight fillers total: Two fillers in quads 4, 5, 6, and 7 (quad 3 remains unfilled) 16 DIMMs in quads 0, 1, 2, and 3 Eight fillers total: Two fillers in quads 4, 5, 6, and 7 (all quads filled) 20 DIMMs in quads 0, 1, 2, 3, and 4 Four fillers total: Two fillers in quads 5 and 7 quad 6 remains unfilled 24 DIMMs in quads 0, 1, 2, 3, 4, and 5 No fillers required 28 DIMMs in quads 0, 1, 2, 3, 4, 5, and 6 No fillers required 32 DIMMs in quads 0, 1, 2, 3, 4, 5, 6, and 7 No fillers required 1 One DIMM filler board covers two adjacent DIMM connectors. 158 Removing and Replacing Components