HP 9000 rp4410-4 User Service Guide, Fifth Edition - HP 9000 rp4410/4440 - Page 52
Detailed Server Description, Internal Core I/O
View all HP 9000 rp4410-4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Figure 3-2 HP 9000 rp4410 and rp4440 Servers with Bezel Removed (Front View) Figure 3-3 HP 9000 rp4410 and rp4440 Servers (Rear View) Detailed Server Description The following sections list information on the main subsystems within the HP 9000 rp4410 and rp4440 servers. I/O Subsystem The following is supported on the HP 9000 rp4410 and rp4440 servers: • PCI-X slots available - 8. - Two dedicated PCI slots: Slot 1 is for SCSI; slot 2 is for LAN. - Four hot-pluggable PCI-X 66 MHz 64-bit 3.3V 25W slots with shared busses and I/O. Slots 3 and 4 share capabilities and slots 5 and 6 share capabilities. - Two hot-pluggable PCI-X 133 MHz 64-bit 3.3V 15W slots dedicated for core I/O. • I/O bandwidth - 4 GBs. • Pinnacle FXe PCI video card. • PCI Gigabit, Fast Ethernet Controller with Wake-on-LAN enabled/disabled with BIOS setup. Internal Core I/O The following is supported on the HP 9000 rp4410 and rp4440 servers: • Dual channel SCSI U320 or U160 (PA8800 only) interface or RAID, two internal 68-pin connectors, two 68-pin external connectors. • SCSI backplane configured as either one or two channels. 52 Installing the System