HP 9000 rp4410-4 User Service Guide, Fifth Edition - HP 9000 rp4410/4440 - Page 30

Table 1-4 Power Supply Status LED (continued) Power LED (Green) On Off On On Predict Fail LED (Amber) Off Off Blinking Off Fail LED (Amber) Status Off On Off Blinking PSU dc outputs are on and OK. Power supply failure. Predictive failure. The PSU is about to fail because of a poorly performing fan. Current limit on 48 VDC output. iLO MP LAN LEDs NOTE: There are two different iLO MP cards that were installed in this server. They have different LEDs on them. Both of them are shown below. One of the iLO MP LAN cards has the amber LED on the left and the green LED on the right. It is shown in Figure 1-9. The internal iLO MP LAN uses an RJ-45 type connector. This connector has two LEDs (LAN link and LAN activity) that signal status and activity. Figure 1-9 iLO MP LAN LEDs - Example 1 Table 1-5 provides iLO MP LED status descriptions. Table 1-5 iLO MP LED Status Descriptions - Example 1 LED 100 M amber 100 M amber 10 M green 10 M green Condition On Blinking On Blinking Status Linked at 100 MBs. No activity. Linked at 100 MBs. Activity present. Linked at 10 MBs. No activity. Linked at 10 MBs. Activity present. The other iLO MP LAN card has the green LED on the left and the amber LED on the right. Is is shown in Figure 1-10. 30 Overview