HP 9000 rp4410-4 User Service Guide, Fifth Edition - HP 9000 rp4410/4440 - Page 23
Detailed Server Description, I/O Subsystem, Internal Core I/O
View all HP 9000 rp4410-4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Figure 1-3 HP 9000 rp4410/rp4440 Server (Rear View) Detailed Server Description The following sections list information on the main subsystems within the HP 9000 rp4410 and rp4440 servers. I/O Subsystem The following is supported on the HP 9000 rp4410 and rp4440 servers: • PCI-X slots available - 8 - Two dedicated PCI slots: Slot 1 is for SCSI; slot 2 is for LAN - Four hot-pluggable PCI-X 66 MHz 64-bit 3.3V 25W slots with shared busses and I/O. Slots 3 and 4 share capabilities and slots 5 and 6 share capabilities - Two hot-pluggable PCI-X 133 MHz 64-bit 3.3V 15W slots dedicated for core I/O • I/O bandwidth - 4 GBs • Pinnacle FXe PCI video card • PCI Gigabit, Fast Ethernet Controller with Wake-on-LAN enabled/disabled with BIOS setup Internal Core I/O The following is supported on the HP 9000 rp4410 and rp4440 servers: • Dual channel SCSI U320 or U160 (PA8800 only) interface or RAID, two internal 68-pin connectors, two 68-pin external connectors • SCSI backplane configured as either one or two channels • One internal Integrated Drive Electronics (IDE) connector for a slimline optical device (CD and DVD) • No floppy connector • Optional dual channel U320 RAID controller, two internal 68-pin connectors, two 68-pin external connectors (replaces SCSI interface) External Core I/O The following is supported on the HP 9000 rp4410 and rp4440 servers: • Three external serial ports • Two external USB ports • Two SCSI U320 or U160 68-pin connectors (U160 for PA8800 only) • One or two 10/100/1000Base-T ethernet LAN connectors for copper cable • Two USB 2.0 ports Detailed Server Description 23