HP 9000 rp4410-4 User Service Guide, Fifth Edition - HP 9000 rp4410/4440 - Page 53
External Core I/O, Processors, Memory, Cooling, Power Supply Unit
View all HP 9000 rp4410-4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
• One internal Integrated Drive Electronics (IDE) connector for a slimline optical device (CD and DVD). • No floppy connector. • Optional dual channel U320 RAID controller, two internal 68-pin connectors, two 68-pin external connectors (replaces SCSI interface). External Core I/O The following is supported on the HP 9000 rp4410 and rp4440 servers: • Three external serial ports. • Two external USB ports. • Two SCSI U320 or U160 68-pin connectors (U160 for PA8800 only). • One or two 10/100/1000Base-T ethernet LAN connectors for copper cable. • Two USB 2.0 ports. • Three DB-9 ports (console, UPS, and modem). • Optional dual channel U320 RAID controller, two 68-pin external connectors (replaces SCSI interface). Processors The following is supported on the HP 9000 rp4410 and rp4440 servers: • 800 MHz/1.5 GB cache or 1 GHz/1.5 GB cache per CPU. • Both processors are available with 32 MB or 64 MB L2 cache per dual processor module. • HP 9000 rp4410 server can have one processor or both processors of a single dual processor module enabled, or two processors enabled in each of two dual processor modules. • HP 9000 rp4440 server can be 1P/2C, 2P/2C, 3P/2C, or 4P/2C. Memory The following is supported on the HP 9000 rp4410 and rp4440 servers: • 16 DIMM slots on standard memory extender board. • 32 DIMM slots on optional memory extender board. • Maximum memory size of 128 GB (4 GB DIMMs on 32-slot memory extender board). • Supports up to 32 Double Data Rate (DDR) registered ECC memory, in PC2100 DIMMs. • Supported DDR DIMM sizes: - 128 MB, 256 MB, 512 MB, 1 GB, 2 GB, and 4 GB - Standard 184 pins 2.5V DDR266, CL2, registered, ECC • 133 MHz memory bus frequency, 266 MTransfers/s data, 8.5 GB/s peak data bandwidth. • DIMMs loaded by quads enable interleaved mode and chip spare. • Requires that DIMMs within each group of four (quad) be identical. Cooling Six cooling fans with N+1 redundancy. Power Supply Unit The following is supported on the HP 9000 rp4410 and rp4440 servers: • One 1200 W hot-swappable power supply. • Optional second 1200 W hot-swappable power supply for N+1 redundancy. Detailed Server Description 53