HP 9000 rp4410-4 User Service Guide, Fifth Edition - HP 9000 rp4410/4440 - Page 24
Processors, Memory, Cooling, Power Supply Unit, Front Display Panel, DVD, and Diagnostic Panel
View all HP 9000 rp4410-4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
• Three DB-9 ports (console, UPS, and modem) • Optional dual channel U320 RAID controller, two 68-pin external connectors (replaces SCSI interface) Processors The following is supported on the HP 9000 rp4410 and rp4440 servers: • 800 MHz/1.5 GB cache or 1 GHz/1.5 GB cache per CPU • Both processors are available with 32 MB or 64 MB L2 cache per dual processor module • HP 9000 rp4410 server can have one processor or both processors of a single dual processor module enabled, or two processors enabled in each of two dual processor modules • HP 9000 rp4440 server can be 1P/2C, 2P/2C, 3P/2C, or 4P/2C Memory The following is supported on the HP 9000 rp4410 and rp4440 servers: • 16 DIMM slots on standard memory extender board • 32 DIMM slots on optional memory extender board • Maximum memory size of 128 GB (4 GB DIMMs on 32-slot memory extender board) • Supports up to 32 Double Data Rate (DDR) registered ECC memory, in PC2100 DIMMs • Supported DDR DIMM sizes: - 128 MB, 256 MB, 512 MB, 1 GB, 2 GB, and 4 GB - Standard 184 pins 2.5V DDR266, CL2, registered, ECC • 133 MHz memory bus frequency, 266 MTransfers/s data, 8.5 GB/s peak data bandwidth • DIMMs loaded by quads enable interleaved mode and chip spare • Requires that DIMMs within each group of four (quad) be identical Cooling Six cooling fans with N+1 redundancy. Power Supply Unit The following is supported on the HP 9000 rp4410 and rp4440 servers: • One 1200 W hot-swappable power supply • Optional second 1200 W hot-swappable power supply for N+1 redundancy Front Display Panel, DVD, and Diagnostic Panel The following is supported on the HP 9000 rp4410 and rp4440 servers: • Front panel that provides the controls and indicators commonly used for operation • DVD+RW drive (with CD-write capability); IDE interface; 48x speed • Optional slimline DVD drive • Power button and LED indicators for system status • LED-based diagnostic panel Mass Storage The following is supported on the HP 9000 rp4410 and rp4440 servers: • Up to two SCSI hot-pluggable hard disk drives • Integrated Ultra-3 SCSI dual channel controller; 80 MB/s transfer rate with two 68-pin connectors. The SCSI backplane is configured as either one or two channels 24 Overview