HP 9000 rp4410-4 User Service Guide, Fifth Edition - HP 9000 rp4410/4440 - Page 217

Replacing the Midplane Riser Board, Midplane Riser Board

Get HP 9000 rp4410-4 PDF manuals and user guides View all HP 9000 rp4410-4 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 217 highlights

16. To remove the midplane riser board from the chassis, pull it straight up from the chassis. Figure 6-51 Midplane Riser Board Replacing the Midplane Riser Board To replace the midplane riser board, follow these steps: 1. Replace the midplane riser board onto the keyway slots on the chassis wall. Then push straight down until it seats onto the locking studs. 2. Using a Torx 15 driver, replace and tighten the five T-15 screws attaching the midplane riser board to the chassis. 3. Plug the DVD relay board and front panel display board cable into the midplane riser board. 4. Replace the air baffle. 5. Plug the power distribution board power cable and signal cable into the midplane riser board. 6. Plug the QuickFind diagnostic board cable into the midplane riser board. Midplane Riser Board 217

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
16.
To remove the midplane riser board from the chassis, pull it straight up from the chassis.
Figure 6-51 Midplane Riser Board
Replacing the Midplane Riser Board
To replace the midplane riser board, follow these steps:
1.
Replace the midplane riser board onto the keyway slots on the chassis wall. Then push
straight down until it seats onto the locking studs.
2.
Using a Torx 15 driver, replace and tighten the five T-15 screws attaching the midplane riser
board to the chassis.
3.
Plug the DVD relay board and front panel display board cable into the midplane riser board.
4.
Replace the air baffle.
5.
Plug the power distribution board power cable and signal cable into the midplane riser
board.
6.
Plug the QuickFind diagnostic board cable into the midplane riser board.
Midplane Riser Board
217