IBM x3655 Service Guide - Page 189

v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved. v See Chapter 4, "Parts listing, System x3655, Type 7985," on page 97 to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU). v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a trained service technician. BMC log message Sensor Sensor number type Action Remote Supervisor 8C 17 1. Make sure that the Remote Supervisor Adapter II SlimLine is Adapter II SlimLine detect fully seated in the connector. 2. Replace the Remote Supervisor Adapter II SlimLine. ABR status 8F 0F Information only CPU 1 status 90 07 Information only; if the message remains: Assertion 01 (Thermal trip) 1. Make sure that the fans have good airflow and are not obstructed. 2. (Trained service technician only) Reseat the microprocessor. 3. (Trained service technician only) Replace the microprocessor. CPU 1 status 90 07 (Trained service technician only) Make sure that the Assertion 05 microprocessor is installed correctly. (Configuration error) CPU 1 status 90 07 Information only Assertion 07 (Processor presence detected) or 0A (Processor automatically throttled) CPU 1 status 90 07 1. Check the DIMM error LEDs on the system board. Assertion 08 (Processor disabled) 2. (Trained service technician only) Reseat the microprocessor. 3. (Trained service technician only) Reseat the microprocessor. 4. (Trained service technician only) Replace the microprocessor. CPU 2 status 91 07 Information only; if the message remains: Assertion 01 (Thermal trip) 1. Make sure that the fans have good airflow and are not obstructed. 2. (Trained service technician only) Reseat the microprocessor. 3. (Trained service technician only) Replace the microprocessor. CPU 2 status 91 07 (Trained service technician only) Make sure that the Assertion 05 microprocessor is installed correctly. (Configuration error) CPU 2 status 91 07 Information only Assertion 07 (Processor presence detected) or 0A (Processor automatically throttled) CPU 2 status 91 07 1. Check the DIMM error LEDs on the microprocessor. Assertion 08 (Processor disabled) 2. (Trained service technician only) Reseat the microprocessor. 3. (Trained service technician only) Replace the microprocessor. Chapter 5. Diagnostics 171