IBM x3655 Service Guide - Page 99
Installing, CD/DVD, media, backplane
![]() |
UPC - 883436014533
View all IBM x3655 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Installing the CD/DVD media backplane To install the replacement CD/DVD media backplane, complete the following steps. CD/DVD media backplane 1. Align the CD/DVD media backplane at the rear of the CD/DVD bay. 2. Install the two screws that secure the media backplane to the chassis. 3. Connect the CD/DVD power and signal cables to the two connectors on the media backplane. 4. Connect the operator-information-panel cable to the connector on the system board (J76) (see ″System-board internal connectors on page 11 for the location of the connector). 5. Slide the CD-RW/DVD drive into the bay until it clicks (see "Installing a CD-RW/DVD drive" on page 56). 6. Install the fan-bracket assembly (see "Installing the fan-bracket assembly" on page 67). 7. Install the cover (see "Installing the cover" on page 40). 8. Slide the server into the rack. 9. Connect the cables and power cords. 10. Turn on all attached devices and the server. Chapter 3. Removing and replacing server components 81
![](/manual_guide/products/ibm-x3655-service-guide-079be7e/99.png)