IBM x3655 Service Guide - Page 90

11. Remove the battery: a. Use one finger to push the battery horizontally out of its housing. b. Lift the battery from the socket. 12. Dispose of the battery as required by local ordinances or regulations. See "Battery return program" on page 186 for more information. Installing the battery The following notes describe information that you must consider when replacing the battery in the server. v You must replace the battery with a lithium battery of the same type from the same manufacturer. v To order replacement batteries, call 1-800-426-7378 within the United States and 1-800-465-7999 or 1-800-465-6666 within Canada. Outside the U.S. and Canada, call you IBM marketing representative or authorized reseller. v After you replace the battery, you must reconfigure the server and reset the system date and time. v To avoid possible danger, read and follow the following safety statement. Statement 2: CAUTION: When replacing the lithium battery, use only IBM Part Number 33F8354 or an equivalent type battery recommended by the manufacturer. If your system has a module containing a lithium battery, replace it only with the same module type made by the same manufacturer. The battery contains lithium and can explode if not properly used, handled, or disposed of. Do not: v Throw or immerse into water v Heat to more than 100°C (212°F) v Repair or disassemble To install the replacement battery, complete the following steps: 1. Follow any special handling and installation instructions that come with the replacement battery. 2. Insert the replacement battery: a. Hold the battery in a vertical orientation so the smaller side is facing the housing. b. Place the battery into its socket, and press the battery toward the housing until it snaps into place. 72 IBM System x3655 Type 7985: Problem Determination and Service Guide