IBM x3655 Service Guide - Page 64
Installing, external, cable
UPC - 883436014533
View all IBM x3655 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Riser card assembly Release tab Air baffle External SAS cable slot External SAS cable 9. Disconnect the other end of the cable from the external SAS connector on the system board. If you are instructed to return the external SAS cable, follow all packaging instructions and use any packaging material that are supplied to you. Installing the external SAS cable To install the external SAS cable complete the following steps: 1. Read the safety information that begins on page vii and "Installation guidelines" on page 35. 2. Turn off the server and all attached devices. 3. Disconnect all external cables and power cords. 4. Slide the server out of the rack. 5. Remove the cover (see "Removing the cover" on page 39). 6. Remove the riser-card assembly (see "Removing the riser-card assembly" on page 84). 7. Remove the air baffle (see "Removing the air baffle" on page 41). 8. Remove the cap on the external SAS connector on the system board. 46 IBM System x3655 Type 7985: Problem Determination and Service Guide