IBM x3655 Service Guide - Page 92
Removing, operator, information, panel, assembly
![]() |
UPC - 883436014533
View all IBM x3655 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Removing the operator information panel assembly To remove the operator information panel assembly, complete the following steps. Operator information panel Release latch Ribbon cable Release tabs Operator information panel 1. Read the safety information that begins on page vii and "Installation guidelines" on page 35. 2. Turn off the server and all attached devices. 3. Disconnect all external cables and power cords. 4. Remove the cover (see "Removing the cover" on page 39). 5. Remove the fan bracket assembly (see "Removing the fan-bracket assembly" on page 66). 6. Disconnect the operator-information-panel ribbon cable from the system board. 7. Reach inside the server and gently pull up on the cable to separate the velcro holding the cable to the top of the operator panel housing. 8. Slide the operator-information-panel release latch to the left and pull the panel out of the server as far as it will go. 9. Reach inside the server and press the release tabs; then, pull the panel away from the rails and carefully pull the ribbon cable out of the server. 74 IBM System x3655 Type 7985: Problem Determination and Service Guide
![](/manual_guide/products/ibm-x3655-service-guide-079be7e/92.png)