Intel SE7525GP2 Product Specification - Page 144
Boot Block Error Beep Codes, POST Error Beep Codes
View all Intel SE7525GP2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
Error Reporting and Handling Intel® Server Boards SE7320SP2 and SE7525GP2 6.2.2 Boot Block Error Beep Codes Number of Beeps 1 2 3 4 5 6 7 8 9 10 11 12 13 1 long beep Table 61. Boot Block Error Beep Codes Description Insert diskette in floppy drive A: 'AMIBOOT.ROM' file not found in root directory of diskette in A: Base memory error Flash programming successful Floppy read error Keyboard controller BAT command failed No flash EPROM detected Floppy controller failure Boot block BIOS checksum error Flash erase error Flash program error 'AMIBOOT.ROM' file size error BIOS ROM image mismatch (file layout does not match image present in flash device) Insert diskette with AMIBOOT.001 file for multi-disk recovery 6.2.3 POST Error Beep Codes The following table lists the POST error beep codes. Before system video initialization, the BIOS uses these beep codes to inform users of error conditions. Table 62. POST Error Beep Codes Number of Beeps 1 2 3 4 5 6 7 8 9 10 11 Memory refresh timer error Description Parity error in base memory (first 64 KB block) Base memory read / write test error Server board timer not operational Processor error 8042 Gate A20 test error (cannot switch to protected mode) General exception error (processor exception error) Display memory error (system video adapter) ROM checksum error CMOS shutdown register read/write error Cache memory test failed 6.2.3.1 132 Troubleshooting BIOS Beep Codes Table 63. Troubleshooting BIOS Beep Codes Revision 4.0