Home » Intel Manuals » Motherboards » Intel SE7525GP2 » Manual Viewer

Intel SE7525GP2 Product Specification - Page 32

IDE Interface Bus Master Capability and Synchronous DMA Mode

Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

Functional Architecture Intel® Server Boards SE7320SP2 and SE7525GP2 3.4.1 PCI Interface The Intel® 6300ESB I/O controller PCI interface provides a 33-MHz, Revision 2.3-compliant implementation. All PCI signals are 5-V tolerant, except for PME#. The Intel 6300ESB I/O controller integrates a PCI arbiter that supports up to four external PCI bus masters in addition to the internal Intel 6300ESB requests. This PCI interface is used to support onboard PCI devices including the ATI* video controller, Intel® 82541 Gigabit NIC, and the Super I/O chip. The Intel 6300ESB I/O controller hub provides a 64-bit/66 MHz revision 2.2 compliant PCI-X implementation. The bus is also PCI 2.2 compliant to provide backwards compatibility with PCI devices. The Intel 6300ESB ICH also works as the PCI arbiter on this bus and supports up to four external PCI bus masters in addition to the Intel 6300ESB I/O controller. Two 3.3V PCI-X connectors are on this bus. 3.4.2 IDE Interface (Bus Master Capability and Synchronous DMA Mode) The fast IDE interface supports up to four IDE devices providing an interface for IDE hard disks and ATAPI devices. Each IDE device can have independent timings. The IDE interface supports PIO IDE transfers up to 16 Mbytes/sec and Ultra ATA transfers up 100 Mbytes/sec. It does not consume any ISA DMA resources. The IDE interface integrates 16x32-bit buffers for optimal transfers. The Intel® 6300ESB I/O controller IDE system contains two independent IDE signal channels. They can be electrically isolated independently. They can be configured to the standard primary and secondary channels (four devices). 3.4.3 SATA Controller The SATA controller supports two SATA devices providing an interface for SATA hard disks and ATAPI devices. The SATA interface supports PIO IDE transfers up to 16 Mb/s and Serial ATA transfers up to 1.5 Gb/s (150 MB/s). The Intel® 6300ESB I/O controller SATA system contains two independent SATA signal ports. They can be electrically isolated independently. Each SATA device can have independent timings. They can be configured to the standard primary and secondary channels. 3.4.4 Low Pin Count (LPC) Interface The Intel® 6300ESB I/O controller implements an LPC Interface as described in the Low Pin Count Interface Specification, Revision 1.1. The Low Pin Count (LPC) Bridge function of the Intel 6300ESB I/O controller resides in PCI Device 31:Function 0. In addition to the LPC bridge interface function, D31:F0 contains other functional units including DMA, interrupt controllers, timers, power management, system management, GPIO, and RTC. 3.4.5 Compatibility Modules (DMA Controller, Timer/Counters, Interrupt Controller) The DMA controller incorporates the logic of two 82C37 DMA controllers, with seven independently programmable channels. Channels 0-3 are hardwired to 8-bit, count-by-byte transfers, and channels 5-7 are hardwired to 16-bit, count-by-word transfers. Any two of the seven DMA channels can be programmed to support fast Type-F transfers. The Intel® 6300ESB I/O controller supports two types of DMA (LPC and PC/PCI). LPC DMA and PC/PCI DMA use the Intel 6300ESB I/O controller DMA controller. The PC/PCI protocol allows PCI-based peripherals to initiate DMA cycles by encoding requests and grants via two PC/PC 20 Revision 4.0

Section	Page
1. Introduction	13
1.1 Chapter Outline	13
1.2 Server Board Use Disclaimer	13
2. Server Board Overview	14
2.1 Intel® Server Board SE7320SP2	14
2.1.1 Intel® Server Board SE7320SP2 Feature Set	14
2.2 Intel® Server Board SE7525GP2	16
2.2.1 Intel® Server Board SE7525GP2 Feature Set	16
3. Functional Architecture	20
3.1 Processor Sub-system	21
3.1.1 Processor Voltage Regulator Devices (VRDs)	22
3.1.2 Reset Configuration Logic	22
3.1.3 Processor Module Presence Detection	22
3.1.4 GTL2006	22
3.1.5 Common Enabling Kit (CEK) Design Support	23
3.1.6 Processor Support	24
3.1.6.1 Processor Mis-population Detection	24
3.1.6.2 Mixed Processor Steppings	25
3.1.6.3 Mixed Processor Models	25
3.1.6.4 Mixed Processor Families	25
3.1.6.5 Mixed Processor Cache Sizes	25
3.1.6.6 Jumperless Processor Speed Settings	25
3.1.6.7 Microcode	25
3.1.6.8 Processor Cache	25
3.1.6.9 Hyper-Threading Technology	26
3.1.6.10 Intel SpeedStep® Technology	26
3.1.6.11 Intel® Extended Memory 64 Technology (Intel® EM64T) Support	26
3.1.6.12 Execute Disable Bit support	26
3.1.7 Multiple Processor Initialization	26
3.1.8 CPU Thermal Sensors	27
3.1.9 Processor Thermal Control Sensor	27
3.1.10 Processor Thermal Trip Shutdown	27
3.1.11 Processor IERR	27
3.2 Intel® E7320 Chipset (Intel® Server Board SE7320SP2)	27
3.2.1 Memory Controller Hub (MCH)	28
3.2.1.1 Front Side Bus (FSB)	28
3.2.1.2 MCH Memory Sub-System Overview	28
3.2.1.3 PCI Express*	29
3.2.1.4 Hub Interface	29
3.3 Intel® E7525 Chipset (Intel® Server Board SE7525GP2)	29
3.3.1 Memory Controller Hub (MCH)	30
3.3.1.1 Front Side Bus (FSB)	30
3.3.1.2 MCH Memory Sub-System Overview	30
3.3.1.3 PCI Express*	31
3.3.1.4 Hub Interface	31
3.4 Intel® 6300ESB ICH	31
3.4.1 PCI Interface	32
3.4.2 IDE Interface (Bus Master Capability and Synchronous DMA Mode)	32
3.4.3 SATA Controller	32
3.4.4 Low Pin Count (LPC) Interface	32
3.4.5 Compatibility Modules (DMA Controller, Timer/Counters, Interrupt Controller)	32
3.4.6 Advanced Programmable Interrupt Controller (APIC)	33
3.4.7 Universal Serial Bus (USB) Controller	33
3.4.8 RTC	33
3.4.9 GPIO	33
3.4.10 Enhanced Power Management	34
3.4.11 System Management Bus (SMBus 2.0)	34
3.5 Memory Sub-System	34
3.5.1 Memory Sizing	34
3.5.2 Memory Population	35
3.5.3 I2C Bus	37
3.5.4 Disabling DIMMs	38
3.5.4.1 Mechanism for CME/SEC Counter	38
3.5.5 Memory RASUM Features	39
3.5.5.1 DRAM ECC – Intel® x4 Single Device Data Correction (x4 SDDC)	40
3.5.5.2 Integrated Memory Scrub Engine	40
3.5.5.3 Retry on Uncorrectable Error	40
3.5.5.4 Integrated Memory Initialization Engine	41
3.5.5.5 DIMM Sparing Function	41
3.6 I/O Sub-System	42
3.6.1 PCI Subsystem	42
3.6.1.1 P32-A: 32-bit, 33-MHz PCI Subsystem	42
3.6.1.2 P64-A: 64-bit, 66 MHz PCI Subsystem	43
3.6.1.3 P64-Express4: x4 PCI Express* Bus Segment	43
3.6.1.4 P64-Express16: x16 PCI Express bus segment	43
3.6.1.5 Scan Order	43
3.6.1.6 Resource Assignment	43
3.6.1.7 Automatic IRQ Assignment	43
3.6.1.8 Option ROM Support	43
3.6.1.9 PCI APIs	44
3.6.2 Split Option ROM	44
3.6.3 Interrupt Routing	44
3.6.3.1 Legacy Interrupt Routing	44
3.6.3.2 APIC Interrupt Routing	44
3.6.3.3 Legacy Interrupt Sources	45
3.6.3.4 Serialized IRQ Support	45
3.6.3.5 IRQ Scan for PCI IRQ	45
3.6.4 IDE Support	48
3.6.4.1 Ultra ATA/100	48
3.6.4.2 IDE Initialization	48
3.6.5 SATA Support	48
3.6.5.1 SATA RAID	49
3.6.5.2 Intel® RAID Technology Option ROM	49
3.6.6 Video Controller	49
3.6.6.1 Video Modes	50
3.6.6.2 Video Memory Interface	50
3.6.7 Network Interface Controller (NIC)	51
3.6.7.1 Intel® 82541	51
3.6.7.2 NIC Connector and Status LEDs	51
3.6.8 USB 2.0 Support	52
3.6.9 Super I/O Chip	52
3.6.9.1 GPIOs	53
3.6.9.2 Serial Ports	54
3.6.9.3 Floppy Disk Controller	54
3.6.9.4 Keyboard and Mouse	54
3.6.9.5 Wake-up Control	54
3.6.10 BIOS Flash	55
3.7 Configuration and Initialization	55
3.7.1 Memory Space	55
3.7.1.1 DOS Compatibility Region	57
3.7.1.2 Extended Memory	59
3.7.1.3 Memory Shadowing	60
3.7.1.4 System Management Mode Handling	61
3.7.2 I/O Map	62
3.7.3 Accessing Configuration Space	64
3.7.3.1 CONFIG_ADDRESS Register	65
3.7.3.1.1 Bus Number	65
3.7.3.1.2 Device Number and IDSEL Mapping	65
3.8 Clock Generation and Distribution	67
3.8.1 Real Time Clock	67
4. System BIOS	68
4.1 BIOS Identification String	68
4.2 BIOS POST Splash Screen	69
4.2.1 User Interface	69
4.2.1.1 System State Window	70
4.2.1.2 Logo/Diagnostic Window	70
4.2.1.3 Current Activity Window	70
4.2.1.4 System Diagnostic Screen	70
4.2.1.5 Static Information Display	70
4.2.1.5.1 Quiet Boot / OEM Splash Screen	71
4.2.1.5.2 BIOS Boot Popup Menu	71
4.3 BIOS Setup Utility	72
4.3.1 Localization	72
4.3.2 Console Redirection	72
4.3.3 Configuration Reset	72
4.3.4 Keyboard Commands	73
4.4 Entering BIOS Setup	74
4.4.1 Main Menu	74
4.4.2 Advanced Menu	75
4.4.2.1 Processor Configuration Sub-menu	75
4.4.2.2 IDE Configuration Sub-menu	77
4.4.2.3 Floppy Configuration Sub-menu	80
4.4.2.4 Super I/O Configuration Sub-menu	81
4.4.2.5 USB Configuration Sub-menu	81
4.4.2.6 USB Mass Storage Device Configuration Sub-menu	82
4.4.2.7 PCI Configuration Sub-menu	83
4.4.2.8 Memory Configuration Sub-menu	84
4.4.3 Boot Menu	85
4.4.3.1 Boot Settings Configuration Sub-menu Selections	85
4.4.3.2 Boot Device Priority Sub-menu Selections	86
4.4.3.2.1 Hard Disk Drive Sub-menu Selections	86
4.4.3.2.2 Removable Drive Sub-menu Selections	86
4.4.3.2.3 ATAPI CD-ROM Drives Sub-menu Selections	87
4.4.4 Security Menu	87
4.4.5 Server Menu	88
4.4.5.1 System Management Sub-menu Selections	90
4.4.5.2 Power Management Features Sub-menu Selections	90
4.4.5.3 Serial Console Features Sub-menu Selections	91
4.4.5.4 Event Log Configuration Sub-menu Selections	92
4.4.6 Exit Menu	93
4.5 Flash Update Utility	93
4.6 Rolling BIOS and On-line Updates	93
4.7 Flash Update Utility	94
4.7.1 Flash BIOS	94
4.7.1.1 Updating the BIOS from DOS	95
4.7.1.2 Updating the BIOS from Microsoft* Windows* 2000/2003/XP	95
4.7.1.3 Updating the BIOS from Linux	95
4.7.1.4 Updating the BIOS from the EFI Shell	96
4.7.2 User Binary Area	96
4.7.3 Recovery Mode	96
4.7.3.1 BIOS Recovery	97
4.7.3.2 Multi-disk Recovery	98
4.7.4 Update OEM Logo	98
4.7.4.1 Changing the OEM Logo for DOS	99
4.7.4.2 Changing the OEM Logo for Microsoft Windows* 2000 / 2003 / XP	99
4.8 OEM Binary	100
4.9 Operating System Boot, Sleep, and Wake	101
4.9.1 Microsoft Windows* Compatibility	101
4.9.2 Advanced Configuration and Power Interface (ACPI)	101
4.9.3 Sleep and Wake Functionality	102
4.9.4 Power Switch Off to On	102
4.9.5 On to Off (OS absent)	103
4.9.6 On to Off (OS present)	103
4.9.7 System Sleep States	103
4.10 Security	104
4.10.1 Operating Model	105
4.10.2 Administrator/User Passwords and F2 Setup Usage Model	105
4.10.3 Password Clear Jumper	107
4.11 Extensible Firmware Interface (EFI)	107
4.11.1 EFI Shell	107
5. Platform Management	107
5.1.1 5V Standby	109
5.1.2 IPMI Messaging, Commands, and Abstractions	109
5.1.3 IPMI Sensor Model	110
5.1.4 Private Management Buses	110
5.1.5 Mini-Baseboard Management Controller	111
5.2 Onboard Platform Instrumentation Features and Functionality	113
5.2.1 mBMC Self-test	114
5.2.2 SMBus Interfaces	114
5.2.3 External Interface to mBMC	114
5.2.3.1 Private Management I2C Buses	115
5.2.4 Messaging Interfaces	115
5.2.4.1 Channel Management	115
5.2.4.2 User Model	115
5.2.4.3 Request/Response Protocol	115
5.2.4.4 Host to mBMC Communication Interface	116
5.2.4.5 LAN Interface	116
5.2.5 Direct Platform Control (IPMI over LAN)	117
5.2.5.1 LAN Channel Specifications	118
5.2.5.2 LAN Drivers and Setup	119
5.2.5.3 BIOS Boot Flags	119
5.2.5.4 Boot Flags and LAN Console Redirection	119
5.2.6 Wake On LAN / Power On LAN and Magic Packet Support	119
5.2.6.1 Wake On LAN in S4/S5	119
5.2.7 Watchdog Timer	120
5.2.8 System Event Log (SEL)	120
5.2.8.1 Timestamp Clock	120
5.2.9 Sensor Data Record (SDR) Repository	121
5.2.9.1 Initialization Agent	121
5.2.10 Event Message Reception	121
5.2.11 Event Filtering and Alerting	121
5.2.11.1 Platform Event Filtering (PEF)	121
5.2.11.2 Alert over LAN	123
5.2.11.3 System Identification in Alerts	123
5.2.11.4 Platform Alerting Setup	123
5.2.11.5 Alerting On Power Down Events	124
5.2.11.6 Alerting On System Reset Events	124
5.2.11.7 Alert-in-Progress Termination	124
5.2.12 NMI Generation	124
5.2.13 SMI Generation	125
5.3 Platform Management Interconnects	125
5.3.1 Power Supply Interface Signals	125
5.3.1.1 Power-up Sequence	126
5.3.1.2 Power-down Sequence	126
5.3.1.3 Power Control Sources	126
5.3.2 System Reset Control	127
5.3.2.1 Reset Signal Output	127
5.3.2.2 Reset Control Sources	127
5.3.3 Temperature-based Fan Speed Control	127
5.3.3.1 Fan Kick-start	128
5.3.4 Front Panel Control	128
5.3.4.1 Power Button	128
5.3.4.2 Reset Button	129
5.3.4.3 Diagnostic Interrupt Button (Front Panel NMI)	129
5.3.4.4 Chassis ID Button and LED	129
5.3.4.5 Status/Fault LED	130
5.3.4.6 Chassis Intrusion Switch	131
5.3.4.7 Front Panel Lockout	131
5.3.5 Secure Mode Operation	131
5.3.6 FRU Information	132
5.3.6.1 mBMC FRU Inventory Area Format	132
5.4 Sensors	133
5.4.1 Sensor Type Codes	133
6. Error Reporting and Handling	138
6.1 Error Logging	138
6.1.1 Error Sources and Types	138
6.1.2 SMI Handler	138
6.1.2.1 PCI Bus Error	138
6.1.2.2 Processor Bus Error	139
6.1.2.3 Memory Bus Error	139
6.1.2.4 System Limit Error	139
6.1.2.5 Processor Failure	139
6.1.2.6 Boot Event	140
6.1.2.7 Logging Format Conventions	140
6.1.3 Single-bit ECC Error Throttling Prevention	140
6.2 Error Messages and Error Codes	141
6.2.1 POST Error Codes and Messages	141
6.2.2 Boot Block Error Beep Codes	144
6.2.3 POST Error Beep Codes	144
6.2.3.1 Troubleshooting BIOS Beep Codes	144
6.2.4 \	145
6.3 Checkpoints	145
6.3.1 System ROM BIOS POST Task Test Point (Port 80h Code)	145
6.3.2 Diagnostic LEDs	145
6.3.3 POST Code Checkpoints	147
6.3.4 Bootblock Initialization Code Checkpoints	149
6.3.5 Bootblock Recovery Code Checkpoint	150
6.3.6 DIM Code Checkpoints	151
6.3.7 ACPI Runtime Checkpoints	151
6.3.8 Memory Error Codes	152
6.4 Intel® Light-Guided Diagnostics	152
7. Connector Definitions and Pin-outs	153
7.1 Main Power Connector	153
7.2 Memory Module Connector	154
7.3 Processor Socket	155
7.4 I2C Headers	158
7.5 PCI Slot Connector	159
7.6 Front Panel Connector	163
7.7 VGA Connector	164
7.8 NIC Connector	164
7.9 IDE Connector	165
7.10 SATA Connectors	165
7.11 USB Connector	166
7.12 Floppy Connector	167
7.13 Serial Port Connector	168
7.14 Keyboard and Mouse Connector	169
7.15 Miscellaneous Headers	169
7.15.1 Fan Header	169
7.15.2 Intrusion Cable Connector	170
7.15.3 SCSI LED Header	170
7.16 Configuration Jumpers	171
7.16.1 System Recovery and Update Jumpers	171
7.16.2 Rolling BIOS Bank Selection Jumper	172
8. General Specifications	173
8.1 Absolute Maximum Ratings	173
8.2 Mean Time Between Failure (MTBF)	173
8.3 Processor Power Support	174
8.4 Power Supply Specifications	174
8.4.1 Power Timing	174
8.4.2 Voltage Recovery Timing Specifications	178
9. Product Regulatory Compliance	179
9.1 Product Safety Compliance	179
9.1.1 Product EMC Compliance	179
9.1.2 Mandatory/Standard: Certifications, Registration, Declarations	180
9.1.3 Product Regulatory Compliance Markings	180
9.2 Electromagnetic Compatibility Notices	180
9.2.1 Europe (CE Declaration of Conformity)	180
9.2.2 Australian Communications Authority (ACA) (C-Tick Declaration of Conformity)	180
9.2.3 Ministry of Economic Development (New Zealand) Declaration of Conformity	181
9.2.4 BSMI (Taiwan)	181

Match case Limit results 1 per page

Functional Architecture

Intel® Server Boards SE7320SP2 and SE7525GP2

Revision 4.0

3.4.1

PCI Interface

The Intel

6300ESB I/O controller PCI interface provides a 33-MHz, Revision 2.3-compliant

implementation. All PCI signals are 5-V tolerant, except for PME#. The Intel 6300ESB I/O

controller integrates a PCI arbiter that supports up to four external PCI bus masters in addition

to the internal Intel 6300ESB requests. This PCI interface is used to support onboard PCI

devices including the ATI* video controller, Intel

82541 Gigabit NIC, and the Super I/O chip.

The Intel 6300ESB I/O controller hub provides a 64-bit/66 MHz revision 2.2 compliant PCI-X

implementation. The bus is also PCI 2.2 compliant to provide backwards compatibility with PCI

devices. The Intel 6300ESB ICH also works as the PCI arbiter on this bus and supports up to

four external PCI bus masters in addition to the Intel 6300ESB I/O controller. Two 3.3V PCI-X

connectors are on this bus.

3.4.2

IDE Interface (Bus Master Capability and Synchronous DMA Mode)

The fast IDE interface supports up to four IDE devices providing an interface for IDE hard disks

and ATAPI devices. Each IDE device can have independent timings. The IDE interface supports

PIO IDE transfers up to 16 Mbytes/sec and Ultra ATA transfers up 100 Mbytes/sec. It does not

consume any ISA DMA resources. The IDE interface integrates 16x32-bit buffers for optimal

transfers. The Intel

6300ESB I/O controller IDE system contains two independent IDE signal

channels. They can be electrically isolated independently. They can be configured to the

standard primary and secondary channels (four devices).

3.4.3

SATA Controller

The SATA controller supports two SATA devices providing an interface for SATA hard disks and

ATAPI devices. The SATA interface supports PIO IDE transfers up to 16 Mb/s and Serial ATA

transfers up to 1.5 Gb/s (150 MB/s). The Intel

6300ESB I/O controller SATA system contains

two independent SATA signal ports. They can be electrically isolated independently. Each

SATA device can have independent timings. They can be configured to the standard primary

and secondary channels.

3.4.4

Low Pin Count (LPC) Interface

The Intel

6300ESB I/O controller implements an LPC Interface as described in the

Low Pin

Count Interface Specification, Revision 1.1

. The Low Pin Count (LPC) Bridge function of the

Intel 6300ESB I/O controller resides in PCI Device 31:Function 0. In addition to the LPC bridge

interface function, D31:F0 contains other functional units including DMA, interrupt controllers,

timers, power management, system management, GPIO, and RTC.

3.4.5

Compatibility Modules (DMA Controller, Timer/Counters, Interrupt

Controller)

The DMA controller incorporates the logic of two 82C37 DMA controllers, with seven

independently programmable channels. Channels 0–3 are hardwired to 8-bit, count-by-byte

transfers, and channels 5–7 are hardwired to 16-bit, count-by-word transfers. Any two of the

seven DMA channels can be programmed to support fast Type-F transfers.

The Intel

6300ESB I/O controller supports two types of DMA (LPC and PC/PCI). LPC DMA and

PC/PCI DMA use the Intel 6300ESB I/O controller DMA controller. The PC/PCI protocol allows

PCI-based peripherals to initiate DMA cycles by encoding requests and grants via two PC/PC