Konica Minolta AccurioPress C2070/2070P IC-314 User Guide - Page 115

Adding an entry to a calibration table 105 Output Density The vertical axis represents the dot percentage values of the final output data (after applying the calibration table) that is sent to the printer. Input The horizontal axis represents the dot percentage values of the RTP file. Adding an entry to a calibration table You can review a calibration table to make sure that the curves are relatively smooth and continuous. If you are not satisfied with the results, you can adjust the values of the image in the value table in the Editor tab. 1. From the Tools menu, select Resource Center. 2. In the Resource list, select Calibrations. 3. Select the calibration table that you want to add an entry, and click the Editor tab. 4. In the Separation list, select the desired separation to that you want to add an entry. The file and printer values for the separation that you selected appear in the File Value and Printer Value lists. 5. Select a row in the value table, and click the Add button.