Konica Minolta AccurioPress C2070/2070P IC-314 User Guide - Page 147

Creating an imposition template 137 imposition settings in your job according to the selected imposition template. In addition, when you create a template, the IC‑314 print controller version 1.0 publishes the list of imposition templates via JMF. Via JDF, you can then select the desired imposition template by specifying the imposition template name. Creating an imposition template Use the Imposition Template Builder to create an imposition template. The Imposition Template Builder is available only with the Action Pack. The Imposition Template Builder tool enables you to select the imposition method for which you want to create a template, and then define all the parameters for the selected imposition method. There are seven tabs in the Imposition Template Builder, and the options in each tab vary according to the imposition method selected. A detailed list of all the available options can be found in the section Imposition tab in the job parameters window. 1. From the Tools menu, select Imposition Template Builder. The Imposition Template Builder appears and displays tabs that enable you to define all of the required imposition parameters for your new template.