Konica Minolta AccurioPress C2070/2070P IC-314 User Guide - Page 43
Using the X-Rite iSis spectrophotometer to create a calibration table, Requirements, Tools
View all Konica Minolta AccurioPress C2070/2070P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Using the X-Rite iSis spectrophotometer to create a calibration table 33 Using the X-Rite iSis spectrophotometer to create a calibration table Requirements: ● Your spectrophotometer must be connected to the USB port on the IC‑314 print controller version 1.0. The first time that you connect the device to the IC‑314 print controller version 1.0, you are notified that the driver is being installed. Wait for the driver installation to finish before proceeding further. ● Make sure that your spectrophotometer is calibrated. Refer to the spectrophotometer product documentation for more information. ● The Print queue must be ready for printing (not suspended), and the printer must be warmed up. 1. From the Tools menu, select Calibration or click the Calibration icon on the toolbar. 2. From the Measuring device list, select iSis. The following message appears while the IC‑314 print controller version 1.0 connects to the iSis.