Konica Minolta AccurioPress C2070/2070P IC-314 User Guide - Page 56

46 Chapter 3-Calibration 8. In the Save Calibration Results area, select As default name if you want to save the calibration results with its default file name or select Save as, and enter a name for the calibration table in the text box. 9. In the Apply to area, choose if you want the calibration table to apply to All Media Types, or choose Select and select the respective media types to which you want the calibration table to apply. 10. Click Finish. The new calibration table is saved and applied to the next job that prints, provided that the job ticket is programmed to use the paper stock that was calibrated. Creating calibration tables with the Konica Minolta FD‑5/FD‑7 spectrophotometer This section describes how to connect and use the Konica Minolta FD‑5/FD‑7 spectrophotometer to create calibration tables. Connecting the Konica Minolta FD‑5/FD‑7 spectrophotometer to the IC‑314 print controller version 1.0 Before you connect the Konica Minolta FD‑5/FD‑7 spectrophotometer to the IC‑314 print controller version 1.0, make sure that it has been calibrated and set according to the manufacturer's specifications.