Konica Minolta AccurioPress C2070/2070P IC-314 User Guide - Page 118

108 Chapter 7-Managing color Note: There is no need to change the default settings for Screening. 4. In the CMYK source profile list, select the profile against which you want to validate. You can select from: ○ ISO Coated V2 (FOGRA39) (default) ○ PSO Uncoated (FOGRA47) ○ PSO LWC Improved (FOGRA45) ○ GRACoL2006 Coated V2 ○ SWOP2006 Coated 3 V2 5. In the CMYK rendering intent list, select one of the following: ○ Absolute (default)-Emulates the paper white ○ Relative-Removes the paper white 6. In the Destination profile, list select from the following: ○ Linked-This is the default setting and is automatically linked to the last profile generated for this media type using the Profiling tool ○ Manually select one of the other profiles in the list 7. In the Calibration list, select from the following: ○ Linked-This is the default setting and is automatically linked to the last calibration for this media type ○ Manually select one of the other calibrations in the list 8. In the Number of copies box, enter the number of copies that you want to print. 9. If you do not want to print a validation chart, continue with step 12 on page 109. 10. Click Print. The validation chart prints using the standard screen and resolution of 1200 dpi.