Konica Minolta AccurioPress C2070/2070P IC-314 User Guide - Page 47
Using the X-Rite i1iO spectrophotometer to create a calibration table
View all Konica Minolta AccurioPress C2070/2070P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Using the X-Rite i1iO spectrophotometer to create a calibration table 37 Using the X-Rite i1iO spectrophotometer to create a calibration table Requirements: ● Your spectrophotometer must be connected to the USB port on the IC‑314 print controller version 1.0. The first time that you connect the device to the IC‑314 print controller version 1.0, you are notified that the driver is being installed. Wait for the driver installation to finish before proceeding further. ● Before inserting the i1 into the arm of the i1iO, make sure that the i1 spectrophotometer is calibrated by placing it on its calibration plate. Refer to the spectrophotometer product documentation for more information. ● Insert the i1 spectrophotometer in the arm of the i1iO spectrophotometer and make sure that the arm is in its docking position. ● The Print queue must be ready for printing (not suspended), and the printer must be warmed up.