Konica Minolta AccurioPress C2070/2070P IC-314 User Guide - Page 98

88 Chapter 7-Managing color 10. Click Create Profile. This process might take a few minutes 11. In the Profile Name box, type a new name for the profile, or leave the name that the Profiling Tool automatically created based on the screening method. 12. To define the location for saving the destination profile, select one of the following options: ○ Profile Manager-The profile automatically appears in the Profile Manager area. ○ Other-The profile is saved in a specified location, and you can later import the profile to the Profile Manager area in the Resource Center. 13. Click Save to save the profile. 14. In the message that appears, click OK. 15. Click Finish to close the Profiling Tool. Using the i1iO Automated Scanning Table to measure a color chart and create a profile Requirements: ● The press must already be calibrated. ● The i1 spectrophotometer must inserted in the arm of the i1iO automated scanning table. ● The i1iO automated scanning table must be connected to the USB port on the IC‑314 print controller version 1.0. 1. From the Tools menu, select Profiling Tool. 2. Select Print and measure chart. 3. Click Next. 4. Perform the following actions: a. In the Measuring device list, select the i1iO as the measuring device to be used to measure the color chart. b. In the Warm up copies box, select the number of copies of the warm-up file that you want to print. c. In the Tray list, select the tray in which the paper stock for which you want to create a profile is loaded. d. In the Screening list, select the screening method for the profile.