Lenovo ThinkPad i Series 1157 ThinkPad 570 User's Reference - Page 72
Removing the DIMM - socket
View all Lenovo ThinkPad i Series 1157 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Increasing memory Removing the DIMM 1 Power off the computer and disconnect the AC Adapter and all cables from the computer. 2 Close the LCD, turn the computer over, and then remove the battery pack. 3 Loosen the screw and remove the memory slot cover. 4 Press out on the latches on both edges of the socket at the same time. 5 Remove the DIMM. Be sure to save the DIMM for future use. 6 Replace the memory slot cover; then tighten the screw. 7 Replace the battery pack. 8 Turn the computer over again; then connect the AC Adapter and all the cables you disconnected. 56 IBM ThinkPad 570 User's Reference
Increasing memory
Removing the DIMM
1
Power off the computer and disconnect the AC Adapter
and all cables from the computer.
2
Close the LCD, turn the computer over, and then remove
the battery pack.
3
Loosen the screw and remove the memory slot cover.
4
Press out on the latches on both edges of the socket at
the same time.
5
Remove the DIMM.
Be sure to save the DIMM for future use.
6
Replace the memory slot cover; then tighten the screw.
7
Replace the battery pack.
8
Turn the computer over again; then connect the AC
Adapter and all the cables you disconnected.
56
IBM ThinkPad 570 User's Reference