Netgear SRX5308 SRX5308 Reference Manual - Page 108
Setting LAN DMZ Rules, Security, Firewall, LAN DMZ Rules
UPC - 606449065145
View all Netgear SRX5308 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual Setting LAN DMZ Rules The LAN DMZ Rules screen allows you to create rules that define the movement of traffic between the LAN and the DMZ. The default outbound and inbound policies are to allow all traffic between the local LAN and DMZ network. You can then apply firewall rules to block specific types of traffic from either going out from the LAN to the DMZ (outbound) or coming in from the DMZ to the LAN (inbound). There is no drop-down list that lets you set the default outbound policy as there is on the LAN WAN Rules screen. You can change the default outbound policy by blocking all outbound traffic and then enabling only specific services to pass through the VPN firewall. You do so by adding outbound services rules (see "LAN DMZ Outbound Services Rules" on page 4-19). To access the LAN DMZ Rules screen: 1. Select Security > Firewall from the menu. The Firewall submenu tabs display. 2. Click the LAN DMZ Rules submenu tab. The LAN DMZ Rules screen displays. Figure 4-8 To make changes to an existing outbound or inbound service rule: In the Action column to the right of the rule, click one of the following table buttons: • Edit. Allows you to make any changes to the rule definition of an existing rule. Depending on your selection, either the Edit LAN DMZ Outbound Service screen (identical to Figure 4-9 on page 4-19) or Edit LAN DMZ Inbound Service screen (identical to Figure 4-10 on page 4-20) displays, containing the data for the selected rule. • Up. Moves the rule up one position in the table rank. • Down. Moves the rule down one position in the table rank. 4-18 v1.0, April 2010 Firewall Protection