Netgear SRX5308 SRX5308 Reference Manual - Page 140

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual Figure 4-29 2. Below Add Port Triggering Rule, enter the settings as explained in Table 4-11. Table 4-11. Port Triggering Settings Setting Description (or Subfield and Description) Name A descriptive name of the rule for identification and management purposes. Enable From the drop-down list, select Yes to enable the rule. (You can define a rule but not enable it.) The default setting is No. Protocol From the drop-down list, select the protocol to which the rule applies: • TCP. The rule applies to an application that uses the Transmission Control Protocol (TCP). • UDP. The rule applies to an application that uses the User Control Protocol (UCP). Outgoing (Trigger) Port Range Start Port End Port The start port (1-65534) of the range for triggering. The end port (1-65534) of the range for triggering. Incoming (Response) Start Port Port Range End Port The start port (1-65534) of the range for responding. The end port (1-65534) of the range for responding. 3. Click the Add table button. The new port triggering rule is added to the Port Triggering Rules table. 4-50 v1.0, April 2010 Firewall Protection