Netgear SRX5308 SRX5308 Reference Manual - Page 317
Appendix A Default Settings and Technical Specifications - hard reset
![]() |
UPC - 606449065145
View all Netgear SRX5308 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 317 highlights
Appendix A Default Settings and Technical Specifications You can use the reset button located on the rear panel to reset all settings to their factory defaults. This is called a hard reset (for more information, see "Reverting to Factory Default Settings" on page 8-19). • To perform a hard reset, press and hold the reset button for approximately 8 seconds (until the Test LED blinks rapidly). The VPN firewall returns to the factory configuration settings that are shown in Table A-1. • Pressing the reset button for a shorter period of time simply causes the VPN firewall to reboot. Table A-1 shows the default configuration settings for the VPN firewall. Table A-1. VPN Firewall Default Configuration Settings Feature Router Login User login URL Administrator user name (case-sensitive) Administrator login password (case-sensitive) Guest user name (case-sensitive) Guest login password (case-sensitive) Internet Connection WAN MAC address WAN MTU size Port speed Local Network (LAN) LAN IP address Subnet mask RIP direction RIP version Default Behavior https://192.168.1.1 admin password guest password Use default address 1500 10/100/1000 AutoSense 192.168.1.1 255.255.255.0 None Disabled A-1 v1.0, April 2010
![](/manual_guide/products/netgear-srx5308-srx5308-reference-manual-43ed089/317.png)