Netgear SRX5308 SRX5308 Reference Manual - Page 23
Choosing a Location for the SRX5308, Using the Rack-Mounting Kit - how to set up ssl vpn
UPC - 606449065145
View all Netgear SRX5308 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual Choosing a Location for the SRX5308 The SRX5308 is suitable for use in an office environment where it can be free-standing (on its runner feet) or mounted into a standard 19-inch equipment rack. Alternatively, you can rack-mount the SRX5308 in a wiring closet or equipment room. A rack-mounting kit, containing two mounting brackets and four screws, is provided in the package. Consider the following when deciding where to position the SRX5308: • The unit is accessible and cables can be connected easily. • Cabling is away from sources of electrical noise. These include lift shafts, microwave ovens, and air-conditioning units. • Water or moisture cannot enter the case of the unit. • Airflow around the unit and through the vents in the side of the case is not restricted. Provide a minimum of 25 mm or 1 inch clearance. • The air is as free of dust as possible. • Temperature operating limits are not likely to be exceeded. Install the unit in a clean, air- conditioned environment. For information about the recommended operating temperatures for the SRX5308, see Appendix A, "Default Settings and Technical Specifications." Using the Rack-Mounting Kit Use the mounting kit for the SRX5308 to install the appliance in a rack. Attach the mounting brackets using the hardware that is supplied with the mounting kit. Figure 1-4 Before mounting the SRX5308 in a rack, verify that: • You have the correct screws (supplied with the installation kit). • The rack onto which you will mount the SRX5308 is suitably located. Introduction v1.0, April 2010 1-11