Netgear SRX5308 SRX5308 Reference Manual - Page 155

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual 3. Enter the settings as explained in Table 5-4. Table 5-4. Security Policy Editor: Remote Party Settings Setting Description (or Subfield and Description) Connection Security Select the Secure radio button. If you want to connect manually only, select the Only Connect Manually check box. ID Type From the drop-down list, select IP Subnet. Subnet Enter the LAN IP subnet address of the VPN firewall that is displayed on the VPN firewall's VPN Policies screen (see Figure 5-10 on page 5-11). In this example, the subnet address is 192.168.1.0. Mask Enter the LAN IP subnet mask of the VPN firewall that is displayed on the VPN firewall's VPN Policies screen (see Figure 5-10 on page 5-11). In this example, the subnet mask is 255.255.255.0. Protocol From the drop-down list, select All. Use Select the Use check box. Then, from the drop-down list, select Secure Gateway Tunnel. Left drop-down list From the left drop-down list, select Domain Name. Then, below, enter the local FQDN that you entered on the VPN firewall's VPN Wizard screen (see Figure 5-9 on page 5-9). In this example, the domain name is srx_local1.com. ID Type Right drop-down list From the right drop-down list, select Gateway IP Address. Then, below, enter the IP address of the WAN interface that you selected on the VPN firewall's VPN Wizard screen (see Figure 5-9 on page 5-9). In this example, the WAN IP address is 99.180.226.101. Note: You can find the WAN IP address on the Connection Status screen for the selected WAN port. For more information, see "Viewing the WAN Port Connection Status" on page 9-21. 4. Click the disk icon to save the configuration, or select File > Save from the Security Policy Editor menu. Virtual Private Networking Using IPsec Connections v1.0, April 2010 5-13