Netgear SRX5308 SRX5308 Reference Manual - Page 72
Configuring Multi-Home LAN IP Addresses on the Default VLAN, Advanced, MAC Address for VLANs, Unique - secondary ip
UPC - 606449065145
View all Netgear SRX5308 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual 2. Select the Advanced option arrow at the top right of the LAN Setup screen. The LAN Advanced screen displays. Figure 3-4 3. From the MAC Address for VLANs drop-down list, select Unique. (The default is Same.) 4. As an option, you can disable the broadcast of ARP packets for the default VLAN by clearing the Enable ARP Broadcast check box. (The broadcast of ARP packets is enabled by default for the default VLAN.) 5. Click Apply to save your settings. Note: If you attempt to configure more than 16 VLANs while the MAC address for VLANs is set to Unique on the LAN Advanced screen, the MAC addresses that are assigned to each VLAN might no longer be distinct. Configuring Multi-Home LAN IP Addresses on the Default VLAN If you have computers using different IP networks in the LAN (for example, 172.16.2.0 or 10.0.0.0), you can add aliases to the LAN ports and give computers on those networks access to the Internet, but you can do so only for the default VLAN. The IP addresses that are assigned as secondary IP addresses must be unique and must not be assigned to the VLAN. 3-12 v1.0, April 2010 LAN Configuration