Netgear SRX5308 SRX5308 Reference Manual - Page 194
Table 5-17. Security Policy Editor: Remote Party, Mode Config Settings continued
UPC - 606449065145
View all Netgear SRX5308 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual Table 5-17. Security Policy Editor: Remote Party, Mode Config Settings (continued) Setting Protocol Use ID Type Description (or Subfield and Description) From the drop-down list, select All. Select the Use check box. Then, from the drop-down list, select Secure Gateway Tunnel. Left drop-down list From the left drop-down list, select Domain Name. Then, below, enter the local FQDN that you specified in the VPN firewall's Mode Config IKE policy. In this example, we are using srx_local2.com. Right drop-down list From the right drop-down list, select Gateway IP Address. Then, below, enter the IP address of the WAN interface that you selected on the VPN firewall's VPN Wizard screen (see Figure 5-9 on page 5-9). In this example, the WAN IP address is 99.180.226.101. Note: You can find the WAN IP address on the Connection Status screen for the selected WAN port. For more information, see "Viewing the WAN Port Connection Status" on page 9-21. 4. Click the disk icon to save the configuration, or select File > Save from the Security Policy Editor menu. 5-52 Virtual Private Networking Using IPsec Connections v1.0, April 2010