Netgear SRX5308 SRX5308 Reference Manual - Page 161

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual Viewing the VPN Firewall IPsec VPN Connection Status To review the status of current IPsec VPN tunnels: Select VPN > Connection Status from the menu. The VPN Connection Status submenu tabs display, with the IPSec VPN Connection Status screen in view. (Figure 5-18 shows an IPsec SA as an example.) Figure 5-18 The Active IPSec SAs table lists each active connection with the information that is described in Table 5-8 on page 5-19. The default poll interval is 5 seconds. To change the poll interval period, enter a new value in the Poll Interval field, and then click Set Interval. To stop polling, click Stop. Table 5-8. IPsec VPN Connection Status Information Item Policy Name Endpoint Tx (KB) Tx (Packets) State Action Description (or Subfield and Description) The name of the VPN policy that is associated with this SA. The IP address on the remote VPN endpoint. The amount of data that is transmitted over this SA. The number of IP packets that are transmitted over this SA. The current status of the SA. Phase 1 is the authentication phase and Phase 2 is key exchange phase. If there is no connection, the status is IPsec SA Not Established. Click the Connect table button to build the connection, or click the Disconnect table button to terminate the connection. Virtual Private Networking Using IPsec Connections v1.0, April 2010 5-19