Netgear SRX5308 SRX5308 Reference Manual - Page 49

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual Table 2-6. Protocol Binding Settings (continued) Setting Destination Network Description (or Subfield and Description) The destination network settings determine which Internet locations (based on their IP address) are covered by the rule. Select one of the following options from the dropdown list: Any All Internet IP address. Single address In the Start IP field, enter the IP address to which the rule is applied. Address range In the Start IP field and End IP field, enter the IP addresses for the range to which the rule is applied. 5. Click Apply to save your settings. The protocol binding rule is added to the Protocol Binding table. The rule is automatically enabled, which is indicated by the "!" status icon that displays a green circle. Configuring Secondary WAN Addresses You can set up a single WAN Ethernet port to be accessed through multiple IP addresses by adding aliases to the port. An alias is a secondary WAN address. One advantage is, for example, that you can assign different virtual IP addresses to a Web server and an FTP server, even though both servers use the same physical IP address. You can add several secondary IP addresses to a single WAN port. After you have configured secondary WAN addresses, these addresses are displayed on the following firewall rule screens: • In the WAN Destination IP Address drop-down lists of the following inbound firewall rule screens: - Add LAN WAN Inbound Service screen - Add DMZ WAN Inbound Service screen • In the NAT IP drop-down lists of the following outbound firewall rule screens: - Add LAN WAN Outbound Service screen - Add DMZ WAN Outbound Service screen Connecting the VPN Firewall to the Internet v1.0, April 2010 2-25