Netgear SRX5308 SRX5308 Reference Manual - Page 63
Assigning and Managing VLAN Profiles, Network Configuration, LAN Settings - ssl vpn setup
![]() |
UPC - 606449065145
View all Netgear SRX5308 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual When you create a VLAN profile, assign LAN ports to the VLAN, and enable the VLAN, the LAN ports that are members of the VLAN can send and receive both tagged and untagged packets. Untagged packets that enter these LAN ports are assigned to the default PVID 1; packets that leave these LAN ports with the same default PVID 1 are untagged. All other packets are tagged according to the VLAN ID that you assigned to the VLAN when you created the VLAN profile. The following is a typical scenario for a configuration with an IP phone that has two Ethernet ports, one of which is connected to the VPN firewall, the other one to another device: Packets coming from the IP phone to the VPN firewall LAN port are tagged. Packets passing through the IP phone from a connected device to the VPN firewall LAN port are untagged. When you assign the VPN firewall LAN port to a VLAN, packets entering and leaving that LAN port are tagged with the VLAN ID. However, untagged packets entering the VPN firewall LAN port are forwarded to the default VLAN with PVID 1; packets that leave the LAN port with the same default PVID 1 are untagged. Assigning and Managing VLAN Profiles To assign VLAN profiles to the LAN ports and manage VLAN profiles: 1. Select Network Configuration > LAN Settings from the menu. The LAN submenu tabs display, with the LAN Setup screen in view. (Figure 3-1 shows the default VLAN profile and another VLAN profile as examples.) Figure 3-1 LAN Configuration 3-3 v1.0, April 2010
![](/manual_guide/products/netgear-srx5308-srx5308-reference-manual-43ed089/63.png)