Netgear SRX5308 SRX5308 Reference Manual - Page 73

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual It is important that you ensure that any secondary LAN addresses are different from the primary LAN, WAN, and DMZ IP addresses and subnet addresses that are already configured on the VPN firewall.The following is an example of correctly configured IP addresses: WAN1 IP address: 10.0.0.1 with subnet 255.0.0.0 WAN2 IP address: 20.0.0.1 with subnet 255.0.0.0 DMZ IP address: 192.168.10.1 with subnet 255.255.255.0 Primary LAN IP address: 192.168.1.1 with subnet 255.255.255.0 Secondary LAN IP address: 192.168.20.1 with subnet 255.255.255.0 To add a secondary LAN IP address to the default VLAN: 1. Select Network Configuration > LAN Settings from the menu. The LAN Settings submenu tabs display, with the LAN Setup screen in view (see Figure 3-2 on page 3-6). 2. Click the LAN Multi-homing submenu tab. The LAN Multi-homing screen displays. Figure 3-5 The Available Secondary LAN IPs table displays the secondary LAN IP addresses that were added to the VPN firewall. 3. In the Add Secondary LAN IP Address section of the screen, enter the following settings: • IP Address. Enter the secondary address that you want to assign to the LAN ports. • Subnet Mask. Enter the subnet mask for the secondary IP address. 4. Click the Add table button in the rightmost column to add the secondary IP address to the Available Secondary LAN IPs table. LAN Configuration v1.0, April 2010 3-13