Netgear SRX5308 SRX5308 Reference Manual - Page 276
Table 8-3. System Date & Time Settings continued, to save your settings.
UPC - 606449065145
View all Netgear SRX5308 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 276 highlights
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual Table 8-3. System Date & Time Settings (continued) Setting NTP Server (default or custom) Description (or Subfield and Description) From the drop-down list, select an NTP server: • Use Default NTP Servers. The VPN firewall's RTC is updated regularly by contacting a default NETGEAR NTP server on the Internet. • Use Custom NTP Servers. The VPN firewall's RTC is updated regularly by contacting one of the two NTP servers (primary and backup), both of which you must specify in the fields that become available with this menu selection. Note: If you select this option but leave either the Server 1 or Server 2 field blank, both fields are set to the default NETGEAR NTP servers. Note: A list of public NTP servers is available at http://ntp.isc.org/bin/view/Servers/WebHome. Server 1 Name / IP Address Enter the IP address or host name the primary NTP server. Server 2 Name / IP Address Enter the IP address or host name the backup NTP server. 3. Click Apply to save your settings. Note: If you select the default NTP servers or if you enter a custom server FQDN, the VPN firewall determines the IP address of the NTP server by performing a DNS lookup. You must configure a DNS server address on a WAN ISP Settings screen (see "Manually Configuring the Internet Connection" on page 2-11) before the VPN firewall can perform this lookup. 8-22 v1.0, April 2010 Network and System Management