Netgear SRX5308 SRX5308 Reference Manual - Page 20
Power LED, Test LED, Left LAN LEDs, DMZ LED, Internet, Table 1-1., LED Descriptions - reset
UPC - 606449065145
View all Netgear SRX5308 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual The front panel also contains three groups of status indicator light-emitting diodes (LEDs), including Power and Test LEDs, LAN LEDs, and WAN LEDs, all of which are explained in Table 1-1. Power LED DMZ LED Left LAN LEDs Left WAN LEDs Test LED Figure 1-1 Right LAN LEDs Right WAN LEDs Internet LEDs Table 1-1. LED Descriptions Object Power Test Activity On (Green) Off On (Amber) during startup. On (Amber) during any other time Blinking (Amber) LAN Ports Left LED Off On (Green) Blink (Green) Off Description Power is supplied to the SRX5308. Power is not supplied to the SRX5308. Test mode: The SRX5308 is initializing. After approximately 2 minutes, when the SRX5308 has completed its initialization, the Test LED goes off. The initialization has failed or a hardware failure has occurred. The SRX5308 is writing to flash memory (during upgrading or resetting to defaults). The system has booted successfully. The LAN port has detected a link with a connected Ethernet device. Data is being transmitted or received by the LAN port. The LAN port has no link. 1-8 Introduction v1.0, April 20108