Netgear SRX5308 SRX5308 Reference Manual - Page 86

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual 3. Enter the settings as explained in Table 3-4. Table 3-4. Static Route Settings Setting Description (or Subfield and Description) Route Name The route name for the static route (for purposes of identification and management). Active To make the static route effective, select the Active check box. Note: A route can be added to the table and made inactive, if not needed. This allows routes to be used as needed without deleting and re-adding the entry. an inactive route is not advertised if RIP is enabled. Private If you want to limit access to the LAN only, select the Private check box. Doing so prevents the static route from being advertised in RIP. Destination IP Address The destination IP address of the host or network to which the route leads. Subnet Mask The IP subnet mask of the host or network to which the route leads. If the destination is a single host, enter 255.255.255.255. Interface From the drop-down list, select the interface that is the physical network interface (WAN1, WAN2, WAN3, WAN4, or DMZ) or virtual interface (VLAN profile) through which the route is accessible. Gateway IP Address The gateway IP address through which the destination host or network can be reached. Metric The priority of the route. Select a value between 2 and 15. If multiple routes to the same destination exist, the route with the lowest metric is used. 4. Click Apply to save your settings. The new static route is added to the Static Route table. To edit a static route that is in the Static Route table: 1. Select its entry from the table and click the Edit table button in the Action column. The Edit Static Route screen displays. This screen is identical to the Add Static Route screen that is described earlier in this section with the exception that you cannot change the name of the static route. 2. Enter the settings as explained in Table 3-4. 3. Click Apply to save your settings. 3-26 v1.0, April 2010 LAN Configuration