Netgear SRX5308 SRX5308 Reference Manual - Page 46
Configuring Load Balancing - ssl vpn speed
![]() |
UPC - 606449065145
View all Netgear SRX5308 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual Configuring Load Balancing To configure load balancing: 1. Select Network Configuration > WAN Settings from the menu. 2. Click the WAN Mode tab. The WAN Mode screen displays. Figure 2-15 3. In the Load Balancing Settings section of the screen, configure the following settings: a. Select the Load Balancing Mode radio button. b. From the corresponding drop-down list on the right, select one of the following load balancing methods: • Weighted LB. With weighted load balancing, balance weights are calculated based on WAN link speed and available WAN bandwidth. This is the default setting and most efficient load-balancing algorithm. • Round-robin. With round-robin load balancing, new traffic connections are sent over a WAN link in a serial method irrespective of bandwidth or link speed. For example, if the WAN1, WAN2, and WAN3 interfaces are active in round-robin load balancing mode, an HTTP request could first be sent over the WAN1 interface, then a new FTP session could start on the WAN2 interface, and then any new connection to the Internet could be made on the WAN3 interface. This load-balancing method ensures that a single WAN interface does not carry a disproportionate distribution of sessions. 4. Click Apply to save your settings. 2-22 Connecting the VPN Firewall to the Internet v1.0, April 2010
![](/manual_guide/products/netgear-srx5308-srx5308-reference-manual-43ed089/46.png)