Netgear SRX5308 SRX5308 Reference Manual - Page 38

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual 7. In the Internet (IP) Address section of the screen, configure the IP address settings as explained in Table 2-3. Click the Current IP Address link to see the currently assigned IP address. Figure 2-11 Table 2-3. Internet (IP) Address Settings Setting Description (or Subfield and Description) Get Dynamically If your ISP has not assigned you a static IP address, select the Get Dynamically from ISP from ISP radio button. The ISP automatically assigns an IP address to the VPN firewall using DHCP network protocol. Client Identifier Select the Client Identifier check box if your ISP requires the Client Identifier information to assign an IP address using DHCP. Vendor Class Identifier Select the Vendor Class Identifier check box if your ISP requires the Vendor Class Identifier information to assign an IP address using DHCP. Use Static IP Address If your ISP has assigned you a fixed (static or permanent) IP address, select the Use Static IP Address radio button and enter the following settings: IP Address Static IP address assigned to you. This address identifies the VPN firewall to your ISP. Subnet Mask The subnet mask is usually provided by your ISP. Gateway IP Address The IP address of the ISP's gateway is usually provided by your ISP. 2-14 Connecting the VPN Firewall to the Internet v1.0, April 2010