Netgear SRX5308 SRX5308 Reference Manual - Page 280

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual Table 9-1. WAN Traffic Meter Settings (continued) Setting Description (or Subfield and Description) When Limit is reached Block Traffic Send e-mail alert Select one of the following radio buttons to specify what action the VPN firewall performs when the traffic limit has been reached: • Block All Traffic. All incoming and outgoing Internet and email traffic is blocked. • Block All Traffic Except E-Mail. All incoming and outgoing Internet traffic is blocked, but incoming and outgoing email traffic is still allowed. An email alert is sent when traffic is blocked. Ensure that emailing of logs is enabled on the Email and Syslog screen (see "Activating Notification of Events, Alerts, and Syslogs" on page 9-5). 3. Click Apply to save your settings. 4. If you want to enable the traffic meter for another WAN interface, select the appropriate WAN TrafficMeter tab for that interface, and repeat step 2 and step 3 for that WAN interface. The contents of the WAN2 TrafficMeter, WAN3 TrafficMeter, and WAN4 TrafficMeter screens are identical to the WAN1 TrafficMeter screen with the exception of WAN interface number. To display a report of the Internet traffic by type for the WAN1 interface, click the Traffic by Protocol option arrow at the top right of the WAN1 TrafficMeter screen. (Each WAN TrafficMeter screen has a Traffic by Protocol option arrow that enables you to display the Internet traffic by type for that WAN interface.) The Traffic by Protocol screen appears in a popup window. Figure 9-2 9-4 Monitoring System Access and Performance v1.0, April 2010