Netgear SRX5308 SRX5308 Reference Manual - Page 34

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual The auto detect process returns one of the following results: • If the auto-detect process is successful, a status bar at the top of the screen displays the results (for example, "DHCP service detected"). • If the auto detect process senses a connection method that requires input from you, it prompts you for the information. All methods with their required settings are explained in Table 2-1. Table 2-1. Internet Connection Methods Connection Method Manual Data Input Required DHCP (Dynamic IP) PPPoE PPTP Fixed (Static) IP No data is required. Login, Password, Account Name, Domain Name Login, Password, Account Name, My IP Address, and Server IP Address; IP Address, Subnet Mask, and Gateway IP Address; and related data supplied by your ISP. • If the auto detect process does not find a connection, you are prompted either to check the physical connection between your VPN firewall and the cable or DSL line or to check your VPN firewall's MAC address. For more information, see "Configuring the WAN Mode" on page 2-16 and "Troubleshooting the ISP Connection" on page 10-5. 4. To verify the connection: a. Return to the WAN screen by selecting Network Configuration > WAN Settings from the menu. b. Click the Status button in the Action column of the WAN interface that you just configured to display the Connection Status popup window. Figure 2-8 2-10 Connecting the VPN Firewall to the Internet v1.0, April 2010