HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 109
display stp root
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Field Mode Description MSTI mode: • Default-The default instance MSTI 0. • Static-The static MSTI. display stp root Syntax View display stp root [ | { begin | exclude | include } regular-expression ] Any view Default level 1: Monitor level Parameters |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the specified regular expression and all lines that follow. exclude: Displays all lines that do not match the specified regular expression. include: Displays all lines that match the specified regular expression. regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. Description Use display stp root to display the root bridge information of all MSTIs. Examples # In MSTP mode, display the root bridge information of all spanning trees. display stp root MSTID Root Bridge ID ExtPathCost IntPathCost Root Port 0 0.00e0-fc0e-6554 200200 0 GigabitEthernet1/0/1 Table 30 Command output Field ExtPathCost IntPathCost Root Port Description External path cost. The device automatically calculates the default path cost of a port. Or, you can use the stp cost command to configure the path cost of a port. Internal path cost. The device automatically calculates the default path cost of a port. Or, you can use the stp cost command to configure the path cost of a port. Root port name (displayed only if a port of the device is the root port of MSTIs). 101