HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 89

View undo port link-aggregation group Ethernet interface view Default level 2: System level Parameters number: Specifies the number of the aggregate interface corresponding to an aggregation group. The number argument ranges from 1 to 128. Description Use port link-aggregation group to assign the Ethernet interface to the specified aggregation group. Use undo port link-aggregation group to remove the Ethernet interface from the aggregation group to which it belongs. An Ethernet interface can belong to only one aggregation group. Examples # Assign Layer 2 Ethernet interface GigabitEthernet 1/0/1 to Layer 2 aggregation group 1. system-view [Sysname] interface gigabitethernet 1/0/1 [Sysname-GigabitEthernet1/0/1] port link-aggregation group 1 reset counters interface Syntax reset counters interface [ bridge-aggregation [ interface-number ] ] View User view Default level 2: System level Parameters bridge-aggregation: Clears statistics for Layer 2 aggregate interfaces. interface-number: Specifies an aggregate interface number. If the interface-number argument is not specified, this command clears statistics of all aggregate interfaces of the specified type. Description Use reset counters interface to clear the statistics of the specified aggregate interface or interfaces. Before collecting statistics for a Layer 2 aggregate interface within a specific period, clear the existing statistics of the interface. • If no keywords or argument is specified, the command clears the statistics of all interfaces in the system. • If only the bridge-aggregation keyword is specified, the command clears the statistics of all Layer 2 aggregate interfaces. • If the bridge-aggregation interface-number keyword and argument combination is specified, the command clears the statistics of the specified Layer 2 aggregate interface. 81