HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 186

oui: Specifies the OUI address you want to remove, in the format of H-H-H. For example, 1234-1200-0000. An OUI address is the logic AND result of mac-address and oui-mask. An OUI address cannot be a broadcast address, a multicast address, or an all-zero address. Description Use voice vlan mac-address to allow packets carrying the specified OUI address to pass through. Use undo voice vlan mac-address to prohibit packets carrying the specified OUI address from passing through. Use display voice vlan oui to display the OUI addresses supported. By default, the system is configured with the default OUI addresses. You can remove the default OUI addresses and then add recognizable OUI addresses manually. The Switch Series supports up to 16 OUI addresses. Table 43 Default OUI addresses Number 1 2 3 4 5 6 7 OUI address 0001-E300-0000 0003-6B00-0000 0004-0D00-0000 00D0-1E00-0000 0060-B900-0000 00E0-7500-0000 00E0-BB00-0000 Vendor Siemens phone Cisco phone Avaya phone Pingtel phone Philips/NEC phone Polycom phone 3Com phone Related commands: display voice vlan oui. Examples # Add a recognizable OUI address 1234-1200-0000 by specifying the MAC address as 1234-1234-1234 and the mask as fff-ff00-0000, and configure its description string as PhoneA. system-view [Sysname] voice vlan mac-address 1234-1234-1234 mask ffff-ff00-0000 description PhoneA voice vlan mode auto Syntax voice vlan mode auto View undo voice vlan mode auto Layer 2 Ethernet interface view Default level 2: System level Parameters None 178