HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 93
port-isolate enable
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
port-isolate enable Syntax port-isolate enable View undo port-isolate enable Layer 2 Ethernet interface view, Layer 2 aggregate interface view Default level 2: System level Parameters None Description Use port-isolate enable to assign a port to an isolation group. Use undo port-isolate enable to remove a port from the isolation group. • To assign Ethernet ports to the isolation group one by one, perform the command in Ethernet interface view. • To assign a Layer 2 aggregate interface to the isolation group, perform the command in Layer 2 aggregate interface view. The configuration applies to the Layer 2 aggregate interface and all its member ports. If the switch fails to apply the port-isolate enable command to a Layer 2 aggregate interface, it does not assign any member port of the aggregate interface to the isolation group. If the failure occurs on a member port, the switch can still assign other member ports to the isolation group. For more information about Layer 2 aggregate interfaces, see Layer 2-LAN Switching Configuration Guide. NOTE: You cannot assign the member ports of a service loopback group to an isolation group, and vice versa. Examples # Assign ports GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 to the isolation group. system-view [Sysname] interface gigabitethernet 1/0/1 [Sysname-GigabitEthernet1/0/1] port-isolate enable [Sysname-GigabitEthernet1/0/1] quit [Sysname] interface gigabitethernet 1/0/2 [Sysname-GigabitEthernet1/0/2] port-isolate enable # Assign Layer 2 aggregate interface Bridge-Aggregation 1 to the isolation group. system-view [Sysname] interface bridge-aggregation 1 [Sysname-Bridge-Aggregation1] quit [Sysname] interface GigabitEthernet 1/0/1 [Sysname-GigabitEthernet1/0/1] port link-aggregation group 1 [Sysname-GigabitEthernet1/0/1] quit [Sysname] interface GigabitEthernet 1/0/2 [Sysname-GigabitEthernet1/0/2] port link-aggregation group 1 85